SC4 UK LTD

General information

Managing Director: Shay Eddy
LinkedIn Profile - http://www.linkedin.com/profile/view?id=139565605&locale=en_US&trk=tyah&trkInfo=tas%3Ashay%20%2Cidx%3A2-1-2

Financial Director: Karen Eddy
LinkedIn Profile - http://www.linkedin.com/profile/view?id=112535530&locale=en_US&trk=tyah&trkInfo=tas%3Akaren%2Cidx%3A2-1-2

Production Manager: Wes Smith
LinkedIn Profile - http://www.linkedin.com/profile/view?id=88329179&locale=en_US&trk=tyah&trkInfo=tas%3Awes%2Cidx%3A2-1-2

Health and Safety Manager & HR Manager/Quality Insurance Representative/Accountants Assistant : Naomi Eddy
LinkedIn Profile - http://www.linkedin.com/profile/view?id=267861054&locale=en_US&trk=tyah2&trkInfo=tas%3ANaomi%20eddy%2Cidx%3A1-1-1

Sawing and Drilling We operate a Kaltenbach KBS1301/KDX1215 close coupled Sawing & Drilling line with hard stamping facility
The machine is programmed using our customers supplied Cam / Dstv data.
The system is fully CNC controlled but can also be programmed manually.
Operating range:-
Angles from 80 x 60 x 10mm up to 250 x 250 x 28mm
Sections from 80mm wide up to 1200mm wide (maximum height 400mm)
Hole sizes from 8mm up to 40mm (max)
Mitre cutting range up to 60° Degrees

Fabrication We offer full structural fabrication, carried out by time served craftsmen - welders fully coded & operating under established welding procedures. From simple Fabrication to fully assembled structures. Our Fabrication department has been open since 2003 and continues to grow.

Straightening to 1;1000 is offered and with 5 presses ranging from 80 to 400 tonnes capacity with the ability to handle 25m long material most customer requirements can be accommodated.

SC4's unique cold separation and patented straightening process offers virtually distortion free structural tees and other split sections, with no HAZ or martinsitic layer. All split sections are straightened to tighter than BS4 tolerances. Sections up to 1000mm wide by 500mm high and 25m long can be split. Material to be split can be either on a free issue basis, or supplied by SC4 with all relevant certification.

Shot Blasting We offer shotblasting to SA 2.5 on a full range of sections up to 22 metres, along with....

Primer Painting to 20 microns DFT.

Piling services offered include the fabrication of junction and corner piles as well as the pairing and welding of all BS Piling Section including Straightening. Piles can be paired over 25m in length.